Duct Tape and Baling Wire - White Ink

Screen Print Transfer - Low Heat (rough feel before pressing)

• Pre-press shirt to remove wrinkles and moisture at 375 for 5-7 seconds.
• Place transfer on shirt and press at 375 for 7-10 seconds with HEAVY pressure.
• HOT PEEL gently!

Screen Print Transfer - High Heat (smooth feel before pressing)

• Pre-press shirt to remove wrinkles and moisture at 35 for 5-7 seconds.
• Place transfer on shirt and press at 335for 7-10 seconds with HEAVY pressure.
• HOT PEEL gently!
• Higher heat may be needed for your press.  If you experience any resistance, replace cover and press again with more heat. 

Each press is different so adjust your temp and press accordingly. All of our screen print transfers require HEAVY pressure. We strongly encourage the use of a professional heat press and not a budget heat press for the best pressing results. We DO NOT recommend using an Easy Press or any press like that for application of our transfers.

Direct To Film (DTF)

Direct to film prints offer all the benefits of screen prints and come on a clear carrier sheet which allows you to see exact print placement.

Pressing Instructions:

• Pre-press shirt to remove wrinkles and moisture at 280 for 10-15 seconds.
• place transfer on shirt and press at 280 for 15-20 seconds with medium pressure. If the design contains small, intricate detail, please use HEAVY pressure.
• COLD PEEL!!! Wait for transfer to cool completely and then gently remove film.
• Press again at 280 degrees for 5 seconds with a cover sheet.